On Thu, 15 Sep 2011 08:39:54 +0200 Rob Hamerling wrote:
With me the problem was over after replacing mouse.sys by amouse.sys:
- REM-ming out the line with mouse.sys
- un-REM-ming (activating) the line with amouse.sys
Hope this works for you too.
Thank you, thank you, thank you!
That was the fix (also, I disabled PS2 mouse in the bios but that alone did not
help).
--
Julian Thomas:
jt@jt-mj.net http://jt-mj.net
In the beautiful Genesee Valley of Western New York State!
-- --
All parts should go together without forcing. You must remember that the parts
you are reassembling were disassembled by you. Therefore, if you can't get them
together again, there must be a reason. By all means, do not use a hammer.
--IBM maintenance manual, 1925
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/os2hardware/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/os2hardware/join
(Yahoo! ID required)
<*> To change settings via email:
os2hardware-digest@yahoogroups.com
os2hardware-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
os2hardware-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
---
* Origin: Waldo's Place USA Internet Gateway (1:3634/1000)