Hola All!, saludo cordial

I know I might have asked this here a while back, buit looking at my historic messages for the life of me I cannot seem to find them.

I want to customize my BBS, meaning the ANSIs, prompts and menus but I found it a bit challenging, I was used to RA/ELEBBS way of showing columns so you knew exactly where something was going to be shown, so I have not been able to edit my prompts, I'm using pablodrazw and I've changed *some* screens but menus and prompts have proven to be difficult for me. I've read the docs that you can use Mystic's way to repeat characters and do cool stuff but I just couldn't figure it out.

for instace I tried editing msghdr.asc using overwrite but when I tried reading a messaage the message header fields are gone, someone advised to sue the internal editor, I tried that but screwed up the prompts.

I know apart from this and some adive from reddit there's nt a lot more to seek for help.

Please try not to be rude if I miss any of your responses normally I read messages to me, so if you reply to somebody else on a response to me I might miss it but it's involuntary.

Many thanks. -- again--

--
Saludos/Kind Regards
David Gonzalez
- MikroTik Certified Trainer
- ESP.COLOMBIA, ESP.MIKROTIK Moderator
- SysOp @ SkyNet BBS | telnet://bbs.skynet.com:20023


--- GoldED+/W32-MSVC 1.1.5-b20180707
* Origin: SkyNet BBS Colombia - telnet://bbs.skynetbbs.com:20023 (4:930/1)

Re: Editing ANSI screens.
By: David Gonzalez to All on Fri Jan 03 2025 14:07:17

Someone advised to sue the internal editor...

Hope you got a good lawyer. ;)
--- SBBSecho 3.23-Linux
* Origin: End Of The Line BBS - endofthelinebbs.com (1:124/5016)

Hola All!, saludo cordial

04 Jan 25 20:39, Mortar M. escribi(ste) a ti:

As an update, I found Icy Draw to be an amazing tool, I came across it on anther thread but for some reason my Win10 PC won't run it,. so just forgot about it.

On a PC reinstall, I tried it again and it's just the Photoshop for ANSI IMHO, I've done many of my screens on it and it's great.

I'm still trying to get tgether the whole MCI codes and trying to ptimize with duplication of chars but I havce to study for upcoming ERLectromagnetics class and 1 goes before 2, y'all know.

Thanks for your hjelpful advice.

Re: Editing ANSI screens.
By: David Gonzalez to All on Fri Jan 03 2025 14:07:17

Someone advised to sue the internal editor...

Hope you got a good lawyer. ;)
--- SBBSecho 3.23-Linux
* Origin: End Of The Line BBS - endofthelinebbs.com (1:124/5016)

--
Saludos/Kind Regards
David Gonzalez
- MikroTik Certified Trainer
- ESP.COLOMBIA, ESP.MIKROTIK Moderator
- SysOp @ SkyNet BBS | telnet://bbs.skynet.com:20023


--- GoldED+/W32-MSVC 1.1.5-b20180707
* Origin: SkyNet BBS Colombia - telnet://bbs.skynetbbs.com:20023 (4:930/1)

Hi, is anyone reading this?...


On 1/5/2025 3:57, David Gonzalez wrote:

Hola All!, saludo cordial

Quick and easy, Is there a way to have the language selection prompt *before* user login is displayed?.

Sorry if there is such option, I was going through all of my new user settings and for the life of me, I could not find it.

If there wasn{t, can I implement it somehow on the preuser file?.

--
Saludos/Kind Regards
David Gonzalez
- MikroTik Certified Trainer
- ESP.COLOMBIA, ESP.MIKROTIK Moderator
- SysOp @ SkyNet BBS | telnet://bbs.skynetbbs.com:20023

--- GoldED+/W32-MSVC 1.1.5-b20180707
* Origin: SkyNet BBS Colombia - telnet://bbs.skynetbbs.com:20023 (4:930/1)

--
Atentamente/Regards
David G
SysOp @SkyNet BBS (bbs.skynetbbs.com:20023)

--- Mystic BBS/NNTP v1.12 A48 (Linux/64)
* Origin: SkyNet BBS Colombia bbs.skynetbbs.com:20023 (4:930/1)

Re: Re: Editing ANSI screens.
By: David Gonzalez to All on Fri Jan 17 2025 20:44:10

Hi, is anyone reading this?...

The question is illogical as the answer will not provide the information you seek, e.g., I read the message, but I don't have an answer, which is your true goal. However, asking if anyone has a solution is also illogical since if someone did, they would have posted it.

In short, be patient. :)
--- SBBSecho 3.23-Linux
* Origin: End Of The Line BBS - endofthelinebbs.com (1:124/5016)

On 17 Jan 2025, David Gonzalez said the following...

Hi, is anyone reading this?...

We are, but apparently nobody has an answer to your question. ;)

... If a pig loses its voice, is it disgruntled?

--- Mystic BBS v1.12 A48 (macOS/64)
* Origin: Saturn's Orbit BBS - From Brazil to the World! (4:801/188)

Re: Re: Editing ANSI screens.
By: David Gonzalez to All on Fri Jan 17 2025 08:44 pm

Hi, is anyone reading this?...

Yes, I'm reading this.

Atentamente/Regards
David G
SysOp @SkyNet BBS (bbs.skynetbbs.com:20023)

-+- Mystic BBS/NNTP v1.12 A48 (Linux/64)
* Origin: SkyNet BBS Colombia bbs.skynetbbs.com:20023 (4:930/1)

Your system is not reachable.
--- SBBSecho 3.23-Linux
* Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)

On 1/29/2025 9:51, Dan Clough wrote:

Re: Re: Editing ANSI screens.
By: David Gonzalez to All on Fri Jan 17 2025 08:44 pm

> Hi, is anyone reading this?...

Yes, I'm reading this.

> Atentamente/Regards
> David G
> SysOp @SkyNet BBS (bbs.skynetbbs.com:20023)
>
> -+- Mystic BBS/NNTP v1.12 A48 (Linux/64)
> * Origin: SkyNet BBS Colombia bbs.skynetbbs.com:20023 (4:930/1)

Your system is not reachable.

Indeed, I was migrating to another server due to some hardware issue,
but what does that have to do with my--question, old question by the way?

--
Hasta la Vista Baby!
David G SysOp @SkyNet BBS (bbs.skynetbbs.com:20023)

--- Mystic BBS/NNTP v1.12 A48 (Linux/64)
* Origin: SkyNet BBS Colombia bbs.skynetbbs.com:20023 (4:930/1)

On 1/24/2025 13:18, Flavio Bessa wrote:

On 17 Jan 2025, David Gonzalez said the following...

DG> Hi, is anyone reading this?...

We are, but apparently nobody has an answer to your question. ;)

Or unwilling -- perhaps....

--
Hasta la Vista Baby!
David G SysOp @SkyNet BBS (bbs.skynetbbs.com:20023)

--- Mystic BBS/NNTP v1.12 A48 (Linux/64)
* Origin: SkyNet BBS Colombia bbs.skynetbbs.com:20023 (4:930/1)

DG> Hi, is anyone reading this?...

We are, but apparently nobody has an answer to your question. ;)

Or unwilling -- perhaps....

--
Hasta la Vista Baby!
David G SysOp @SkyNet BBS (bbs.skynetbbs.com:20023)

--- Mystic BBS/NNTP v1.12 A48 (Linux/64)
* Origin: SkyNet BBS Colombia bbs.skynetbbs.com:20023 (4:930/1)

I haven't answered because I don't have an answer for you. I suspect that that's the reason no body has responded. That's the way this works. For you to claim we're "unwilling" is totally out of line.

|11ogg
|11SysOp, Altair IV BBS
|11altairiv.ddns.net:2323

--- Mystic BBS v1.12 A49 2024/05/29 (Windows/64)
* Origin: Altair IV BBS (1:106/1)

ogg wrote to David Gonzalez <=-

DG> Hi, is anyone reading this?...

We are, but apparently nobody has an answer to your question. ;)

Or unwilling -- perhaps....

I haven't answered because I don't have an answer for you. I suspect
that that's the reason no body has responded. That's the way this
works. For you to claim we're "unwilling" is totally out of line.

That seems to be the way this guy rolls... <SHRUG>



... All hope abandon, ye who enter messages here.
=== MultiMail/Linux v0.52
--- SBBSecho 3.23-Linux
* Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)

Come on dude, don't bring that here.

On 1/30/2025 15:45, Dan Clough wrote:

ogg wrote to David Gonzalez <=-

DG> > DG> Hi, is anyone reading this?...

DG> > We are, but apparently nobody has an answer to your question. ;)

DG> Or unwilling -- perhaps....

og> I haven't answered because I don't have an answer for you. I suspect
og> that that's the reason no body has responded. That's the way this
og> works. For you to claim we're "unwilling" is totally out of line.

That seems to be the way this guy rolls... <SHRUG>

.. All hope abandon, ye who enter messages here.
=== MultiMail/Linux v0.52
--- SBBSecho 3.23-Linux
* Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)

--
Hasta la Vista Baby!
David G SysOp @SkyNet BBS (bbs.skynetbbs.com:20023)

--- Mystic BBS/NNTP v1.12 A48 (Linux/64)
* Origin: SkyNet BBS Colombia bbs.skynetbbs.com:20023 (4:930/1)

David Gonzalez wrote to All <=-

DG> > DG> Hi, is anyone reading this?...

DG> > We are, but apparently nobody has an answer to your question.

;)

DG> Or unwilling -- perhaps....

og> I haven't answered because I don't have an answer for you. I suspect
og> that that's the reason no body has responded. That's the way this
og> works. For you to claim we're "unwilling" is totally out of line.

That seems to be the way this guy rolls... <SHRUG>

Come on dude, don't bring that here.

You're the one who brought it here, dude.

See right up there where you said "Or unwilling -- perhaps...."?

Yeah.



... I'd love to help you out. Which way did you come in?
=== MultiMail/Linux v0.52
--- SBBSecho 3.23-Linux
* Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)