1. Forum
  2. FidoNet
  3. EC SUPPORT

  • net2bbs/netfoss

    From Matt Munson@1:114/635 to All on Tue Feb 9 20:42:22 2010
    I am wondering how do i get to set it up with my bbs. When i try to
    load my configuration it says fossil not found.
    Hmmm.....

    --- Ezycom V2.15 00F90258
    * Origin: The Shaman's Inn, where weird is normal (1:114/635)
  • From Shawn Highfield@1:229/452 to Matt Munson on Wed Feb 10 09:25:34 2010
    I am wondering how do i get to set it up with my bbs. When i try to
    load my configuration it says fossil not found.

    I use Netserial instead. The sysop deal is only $25 for unlimited
    nodes. Not what you were asking though...

    Shawn

    ... Help stamp out and abolish redundancy.
    --- Ezycom V2.15g0 01FA027C
    * Origin: Tiny's BBS - http://www.tinysbbs.com (1:229/452)
  • From Marc Carrano@1:320/101 to Shawn Highfield on Sat Jul 9 18:39:00 2011
    I am wondering how do i get to set it up with my bbs. When i try to load my configuration it says fossil not found.

    I use Netserial instead. The sysop deal is only $25 for unlimited nodes. Not what you were asking though...

    Shawn

    ... Help stamp out and abolish redundancy.
    --- Ezycom V2.15g0 01FA027C
    * Origin: Tiny's BBS - http://www.tinysbbs.com (1:229/452)

    I have a couple of questions

    1. what version of Ezycom do I download for the full install


    2. do I just use AT%DT for the modom Int?
    --- SBBSecho 2.12-Win32
    * Origin: The Continuum BBS telnet://mobiusbbs.dyndns.org (1:320/101)
  • From Stephen Gibbs@1:229/452.682 to Marc Carrano on Sun Jul 10 11:38:34 2011
    * From : Marc Carrano
    * To : Shawn Highfield
    * About : Re: net2bbs/netfoss
    * On : Jul 09 2011, At 18:39:00

    Hi Marc,

    I have a couple of questions

    1. what version of Ezycom do I download for the full install


    v2.00 is the full release. You are welcome to stay on v2.00 until the
    next full release, or you can upgrade to the Gamma versions. If you
    choose to upgrade to the gamma versions, you must follow the
    instructions included with each gamma version. The instructions can be
    found in the included WHATSNEW file.

    2. do I just use AT%DT for the modom Int?

    This is my setup - worked fine when I had dialup...

    Comport : 1
    Maximum Baud Rate : 38400
    Locked Port : Yes
    Lower DTR when BUSY : No
    Off Hook : Yes
    Init Response : OK
    Ring String : RING
    Modem Delay : 50
    Force Answer : Yes
    Answer Delay (1/10s) : 50
    Start Time : 00:00
    End Time : 00:00
    Init Tries : 1
    Init String 1 : ATZ|
    Init String 2 : [UnUsed]
    Set Busy String : ATH1|
    Manual Answer String : ATA|
    No Carrier String : NO CARRIER
    Fax Connect String : FAX
    Send BREAK to Modem : No


    Hope this helps...

    Cheers ...

    ... "Happy DeathDay to Rimmer!" -- Lister, The Cat, and Holly
    --- Ezycom V2.15g3 01FB0256
    * Origin: CPBBS * Telnet://ezycom.sytes.net * 2k4-57k6 Baud. (1:229/452.682)
  • From Shawn Highfield@1:229/452 to Marc Carrano on Tue Jul 12 07:44:32 2011
    1. what version of Ezycom do I download for the full install

    You need to install Ezycom 2.0, then upgrade to 2.15G0, G1, and G2.
    I yell at Stephen often about creating a new distro package. :)

    2. do I just use AT%DT for the modom Int?

    I just use atz with netfoss.

    Shawn

    ... TACT: The ability to make guests feel at home when you wish that they were -*- Open!EDIT v0.99k+
    --- Ezycom V2.15g3 01FA027C
    * Origin: Tiny's BBS - Oshawa, ON, CA - http://tinysbbs.com (1:229/452)