Hello All,

Does somebody know where I can get a conversion tool to convert *.msg files
on a MS-Dos system with Frontdoor to *.pkt files, and back?

I do need that for transport of netmail from points 2:280/1208.* to other systems by BinkP with !ROSBink on an other system and and vice versa
receiving netmail too.
I.e. when netmail arrives here, it is converted from *.pkt to *.msg,
then rerouted from point 2:280/1208.0 (Zero) to Point 2:280/1208.1
and than stays here forever, as the RS232 serial port is defective ;-(.
So Point 1 can not poll by analogue modem to this node.

With the asked tool I can convert *.msg mail back to *.pkt to transport it
by floppy diskette to my Point 1 system 10 mm to the right of this Node.
And for outgoing netmail to the binkp system for transport in FidoNet.

If no such tool exist, which I can hardly beleive, then both the *.msg
layout and the *.pkt layout are necessarry to build such a tool myself.
But my programming capabilities are very less to achieve that task.
So my hope is to receive or DownLoad a good conversion tool.

If someone wants to know, I can support a list of software running and available at UniCorn BBS.
A little chance could be that such software has conversion capabilities too for this task, I am not aware off.

Thanks to everyone in advance.

Greetings from Henri, Sysop UniCorn BBS

---
* Origin: Connectivity is the Future; UniCornBBS.Demon.NL (2:280/1208)

Re: MS-Dos conversion tool from/to *.msg from/to *.pkt.
By: Henri Derksen to All. on Sat Jul 04 2020 14:22:00

Does somebody know where I can get a conversion tool to convert *.msg files on a MS-Dos system with Frontdoor to *.pkt files, and back?
I do need that for transport of netmail from points 2:280/1208.* to other systems by BinkP with !ROSBink on an other system and and vice versa

Correct me if I'm missing something, but sounds like you just need a mail tosser program?
---
Underminer
The Undermine BBS - bbs.undermine.ca:423
Fidonet: 1:342/17
* Origin: The Undermine - bbs.undermine.ca - Calgary, AB (1:342/17)

Hi Henri,

On 2020-07-04 14:22:00, you wrote to All.:

Does somebody know where I can get a conversion tool to convert *.msg files on a MS-Dos system with Frontdoor to *.pkt files, and back?

https://fmail.nl.eu.org/?page=dlstd

Bye, Wilfred.

--- FMail-lnx64 2.1.0.18-B20170815
* Origin: FMail development HQ (2:280/464)

On 04 Jul 2020, Henri Derksen said the following...

Hello All,

Does somebody know where I can get a conversion tool to convert *.msg files on a MS-Dos system with Frontdoor to *.pkt files, and back?

I do need that for transport of netmail from points 2:280/1208.* to other systems by BinkP with !ROSBink on an other system and and vice versa receiving netmail too.
I.e. when netmail arrives here, it is converted from *.pkt to *.msg,
then rerouted from point 2:280/1208.0 (Zero) to Point 2:280/1208.1
and than stays here forever, as the RS232 serial port is defective ;-(.
So Point 1 can not poll by analogue modem to this node.

With the asked tool I can convert *.msg mail back to *.pkt to transport
it by floppy diskette to my Point 1 system 10 mm to the right of this Node. And for outgoing netmail to the binkp system for transport in FidoNet.

If no such tool exist, which I can hardly beleive, then both the *.msg layout and the *.pkt layout are necessarry to build such a tool myself. But my programming capabilities are very less to achieve that task.
So my hope is to receive or DownLoad a good conversion tool.

If someone wants to know, I can support a list of software running and available at UniCorn BBS.
A little chance could be that such software has conversion capabilities too for this task, I am not aware off.

Thanks to everyone in advance.

Greetings from Henri, Sysop UniCorn BBS

---

I am stuck on the fact you still have a floppy disk.....

These kinds of utilities already exist.... I do not know what you are using
to toss your mail.... BUT for example fastecho has a pack command that will convert msg to pkt and send it out. FrontDoor has utilities that will send those files to a specific directory as well.... so that you may later collect them.

There is a mail tosser called fmail that will toss your netmail in pkt form
to a specific directoy as well .... not sure if it comes in a DOS flavor. Fmail is actively worked on, author is in fidonet and reads the fmail echo.

Not sure if I helped you...

Still thinking about the floppy drive...

:)

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-= JoesBBS.Com =-

--- Mystic BBS v1.12 A45 2020/02/18 (Raspberry Pi/32)
* Origin: Joe's BBS -=JoesBBS.Com=- (1:342/201)

I am stuck on the fact you still have a floppy disk.....

I keep one handy for the occasion when someone will tell me "I've got these disks and can't read them anymore".

So far no-one in my neighborhood made the remark, but I know someone will 5 minutes after I throw the drive out.

Still thinking about the floppy drive...

How 'bout an accoustic coupler ... :-)

\%/@rd

--- DB4 - July 1 2020
* Origin: Black Olives Matter (2:292/854)

I am stuck on the fact you still have a floppy disk.....

I keep one handy for the occasion when someone will tell
me "I've got these disks and can't read them anymore".

So far no-one in my neighborhood made the remark, but I
know someone will 5 minutes after I throw the drive out.

Still thinking about the floppy drive...

How 'bout an accoustic coupler ... :-)

\%/@rd

As I sit at my desk playing with a ANSI BBS in a dead, well revived OS, I look down my nose at these kinds of things

:(
Joe

---
* Origin: Joe's Mail System 1:342/200 -=joesbbs.com=- (1:342/200)

Hello Ward!

09 Jul 2020 09:40, Ward Dossche wrote to ib joe:

Still thinking about the floppy drive...

How 'bout an accoustic coupler ... :-)

or a z80-mbc with a microsd running cpm 3.0, there is servial examples on howto on facebook :)

with a real pc ?


Regards Benny

... too late to die young :)

--- Msged/LNX 6.1.2 (Linux/5.11.0-gentoo-x86_64 (x86_64))
* Origin: I will always keep a PC running CPM 3.0 (2:230/0)